Package: check-lsi-raid Version: 1.02 Architecture: all Maintainer: Matija Nalis Installed-Size: 65 Depends: storcli, tomsoft-sysv Recommends: tomsoft-nadzor Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/c/check-lsi-raid/check-lsi-raid_1.02_all.deb Size: 12060 SHA256: c112937f6635bca66096cd98e314eda5043fb8bf06b4747d9c509ddbbac8b7a5 SHA1: 1d7c25dbe60e73f0a113783173fe03a41982dcda MD5sum: 204e5c7e6a267415a41b5c83dab7a006 Description: LSI RAID check Packaged from https://github.com/thomas-krenn/check_lsi_raid . storcli and this plugin must be used instead of megacli for LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3508 on Lenovo ThinkSystem SR650 Package: dcc Version: 1.3.158-3 Architecture: amd64 Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 2376 Depends: libc6 (>= 2.14) Homepage: https://www.rhyolite.com/dcc/ Priority: optional Section: mail Filename: pool/main/d/dcc/dcc_1.3.158-3_amd64.deb Size: 559950 SHA256: c0546cba61093715a96248a4ce307835bd13b0795571c6dab917f12a492a8980 SHA1: daf0e731beabde1cbd6cba18f6ed834d52f50606 MD5sum: b4528ca5d07be4a34c5f3051fbbe5ea3 Description: Distributed Checksum Clearinghouses The idea of DCC is that if mail recipients could compare the mail they receive, they could recognize unsolicited bulk mail. A DCC server totals reports of checksums of messages from clients and answers queries about the total counts for checksums of mail messages. A DCC client reports the checksums for a mail message to a server and is told the total number of recipients of mail with each checksum. If one of the totals is higher than a threshold set by the client and according to local whitelists the message is unsolicited, the DCC client can log, discard, or reject the message. Because simplistic checksums of spam would not be effective, the main DCC checksums are fuzzy and ignore aspects of messages. The fuzzy checksums are changed as spam evolves. Since DCC started being used in late 2000, the fuzzy checksums have been modified several times. Package: libhtml-dynamictemplate-perl Version: 0.94-1 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 56 Depends: perl Homepage: http://search.cpan.org/dist/HTML-DynamicTemplate/ Priority: optional Section: perl Filename: pool/main/libh/libhtml-dynamictemplate-perl/libhtml-dynamictemplate-perl_0.94-1_all.deb Size: 8776 SHA256: 864c094425fc207890456dfe2f208acb01e48028f3a763a967895f133af0632b SHA1: a11914945d6d94254ad220cd16ca37289a74f345 MD5sum: 1c0c8dbb056fd01eb7475aa3a781ef5f Description: HTML template class. The HTML::DynamicTemplate is a class implementing a HTML template in perl. Significant features include the ability to set template variables from within the template itself, the ability to recursively include other templates, and the ability to selectively render a specified subset of variables. . This description was automagically extracted from the module by dh-make-perl. Package: libip-country-perl Version: 2.28-1 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 674 Depends: perl Homepage: http://search.cpan.org/dist/IP-Country/ Priority: optional Section: perl Filename: pool/main/libi/libip-country-perl/libip-country-perl_2.28-1_all.deb Size: 316044 SHA256: d4855c9f78fbb4b248be82595997a9dbe4d96b332b1ec0efb9d294de93594dc8 SHA1: 719ae0547ffa43072005647090d91a71788715ac MD5sum: d43289f3c646396a2c43807786f14dc4 Description: fast lookup of country codes from IP addresses Finding the home country of a client using only the IP address can be difficult. Looking up the domain name associated with that address can provide some help, but many IP address are not reverse mapped to any useful domain, and the most common domain (.com) offers no help when looking for country. . IP::Country comes bundled with a database of countries where various IP addresses have been assigned. Although the country of assignment will probably be the country associated with a large ISP rather than the client herself, this is probably good enough for most log analysis applications, and under test has proved to be as accurate as reverse-DNS and WHOIS lookup. . This description was automagically extracted from the module by dh-make-perl. Package: libmail-gpg-perl Version: 1.0.10-2 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 164 Depends: libevent-perl, libgnupg-interface-perl, perl Homepage: https://metacpan.org/release/Mail-GPG Priority: optional Section: perl Filename: pool/main/libm/libmail-gpg-perl/libmail-gpg-perl_1.0.10-2_all.deb Size: 37880 SHA256: 3d42f076bd66d1befcb09ac75a0025a69df7034f7d16cc7a79389702f639bbba SHA1: c815a28c742053ab3ca6aee96e159800237baf3f MD5sum: cb124f6258394cddb7a629729b5cb150 Description: unknown This Perl modules handles all the details of encrypting and signing Mails using GnuPG according to RFC 3156 and RFC 2440, that is OpenPGP MIME and traditional armor signed/encrypted mails. . This description was automagically extracted from the module by dh-make-perl. Package: libmail-spamassassin-plugin-openpgp-perl Version: 1.0.4-2 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 71 Depends: libmail-gpg-perl, perl Homepage: https://metacpan.org/release/Mail-SpamAssassin-Plugin-OpenPGP Priority: optional Section: perl Filename: pool/main/libm/libmail-spamassassin-plugin-openpgp-perl/libmail-spamassassin-plugin-openpgp-perl_1.0.4-2_all.deb Size: 11524 SHA256: 454c1b442f9997349a1ce3185885ed5a7af72401bc4fa09f85afc46ff8ff6138 SHA1: a851917dc2e20dd0e3b527a1c8938d78b06c3da0 MD5sum: 07ea4a2e868dfb5e78e90c6f9868b9d4 Description: A SpamAssassin plugin that validates OpenPGP signed email. (no description was found) . This description was automagically extracted from the module by dh-make-perl. Package: lslk Version: 1.50~tomsoft4 Architecture: all Maintainer: Matija Nalis Installed-Size: 11 Depends: util-linux (>= 2.25) Multi-Arch: foreign Priority: required Section: admin Filename: pool/main/l/lslk/lslk_1.50~tomsoft4_all.deb Size: 2280 SHA256: 284a5a15cf399e740f77a718f1a5542b342583d9642efa7d9f5d608f7fb68825 SHA1: d474b83427c4ac5625cefd81832c909f163e7ff4 MD5sum: 7ef1e885087a5b5a33443faa66b1a5fc Description: replacement for lslk . Wrapper for lslocksfrom util-linux package Package: megacli Version: 8.07.14-1.tomsoft5 Architecture: amd64 Maintainer: Adam Cécile (Le_Vert) Installed-Size: 6701 Depends: libc6 (>= 2.3), libgcc1 (>= 1:3.0), libncurses5 (>= 5.5-5~), libstdc++6 (>= 4.1.1) Conflicts: megaclisas Replaces: megaclisas Provides: megaclisas Homepage: http://www.lsi.com/support/Pages/Download-Results.aspx?keyword=megacli Priority: optional Section: admin Filename: pool/main/m/megacli/megacli_8.07.14-1.tomsoft5_amd64.deb Size: 4176240 SHA256: dc77122ed23a710ca97167fe8f51f9761718088bb6ac27e7c32476b322749552 SHA1: 013681f0a4e8be78c398ef48ab08c6869937e472 MD5sum: 3e9b72657a48f4597135b10bf2ee7ac8 Description: LSI Logic MegaRAID SAS MegaCLI Tool to read and setup LSI Logic MegaRAID SAS HW RAID HBAs. Package: mysqldumpextract Version: 1.13 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 21 Depends: perl:any Breaks: tomsoft-mysql-backup (<< 1.97) Replaces: tomsoft-mysql-backup (<< 1.97) Multi-Arch: foreign Priority: optional Section: database Filename: pool/main/m/mysqldumpextract/mysqldumpextract_1.13_all.deb Size: 5752 SHA256: 1000939e6c05e7f29941d6b9acab82d692d4cd28282d093ba55a657e3b11c738 SHA1: 53e9fcaa0de45e995e79cfc8e5b39ed94f3d7eca MD5sum: 50ea30c0d3b059798f92165dae5f47fd Description: extract only some databases/tables from mysqldump file Works similar to mysqldump command, but instead of working on live database, it works on file in which mysqldump backup was saved. . if reads data from STDIN, so can be used with compressed mysqldump backups, over network etc. It also (as opposed to current versions on mysqldump) support using wildcards in --ignore-table and --ignore-table-data Package: nagios-check-many Version: 1.06c Architecture: all Maintainer: Matija Nalis Installed-Size: 20 Depends: perl:any, nagios-nrpe-server | icinga-common | icinga-cgi | nagios3 Recommends: nagios-plugins-basic Homepage: http://debian.tomsoft.hr/ Priority: extra Section: net Filename: pool/main/n/nagios-check-many/nagios-check-many_1.06c_all.deb Size: 5236 SHA256: 13e4270d047bf4d1132ddc79734498c5beea21a25d6bd48e337ef3f9feabfb58 SHA1: 675adf0fe5f804b5a9d11f5319af77d9cef72706 MD5sum: 56edce696a4bfe477f266547a66df70f Description: nagios plugin to aggregate results of multiple other nagios plugin checks, returning most critical status of them all and joining performance data. Based on idea presented on https://nagios-plugins.org/doc/check-many.html as other two implementations on https://exchange.nagios.org were lacking. Package: nagios-docker Version: 1.04 Architecture: all Maintainer: Petar Godinic Installed-Size: 57 Depends: perl, docker-ce, nagios-nrpe-server, tomsoft-sysv | systemd Multi-Arch: foreign Priority: required Section: admin Filename: pool/main/n/nagios-docker/nagios-docker_1.04_all.deb Size: 12256 SHA256: 6c99fc730b84a01ecdd5fda184956c4aa959cf9353066ff49d5213f67201893f SHA1: 60ef817a5dcf697d6c884dd10c20af3d72549b3c MD5sum: 43c2edd8e5b02d34cbbf8a13a2bee71b Description: check_docker for nagios/icinga You should install this package on Docker servers for monitoring Package: nagios-local-multi Version: 1.11c Architecture: all Maintainer: Matija Nalis Installed-Size: 45 Pre-Depends: nagios-nrpe-server Depends: perl:any, xz-utils, debian-security-support Multi-Arch: foreign Priority: required Section: admin Filename: pool/main/n/nagios-local-multi/nagios-local-multi_1.11c_all.deb Size: 8600 SHA256: 7dbe9bbb9f5b3925ebd67b08c7aadc08df983487439c14558b35e28ada0f0c3d SHA1: ac14f56a3032b53c2cd1b68b38c2376845e13f55 MD5sum: 197b79305eac653ecc1513d018e4eac8 Description: checks its spool dir for non-empty files containing errors This nagios check is to be run via NRPE . It will check /var/spool/nagios-local-multi/ for any visible non-zero-length files containing any output not starting with "OK:", and report them as errors to nagios. Package: nagios-luceed-api Version: 1.17 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 16 Depends: perl, monitoring-plugins-basic | nagios-plugins-basic Priority: optional Section: net Filename: pool/main/n/nagios-luceed-api/nagios-luceed-api_1.17_all.deb Size: 4056 SHA256: 680cd84befeccdd027bab148c03f8793bbbe5c37c22623376956e754d1e34aee SHA1: a6d5eeca6752303fb744dd7ee05649f6870fdc62 MD5sum: d6d60bb7253b26384bd9d6dcbfe6800f Description: Tomsoft - check luceed API Note: currently URI is hardcoded to "/datasnap/rest/nagios/check" Host and port are configurable. . in current form, probably only useful for katara.tomsoft.hr to check apidemo.luceed.hr and other LuceedAPI instances Package: nagios-plugins-contrib Version: 21.20170223+1ts2 Architecture: amd64 Maintainer: Debian Nagios Maintainer Group Installed-Size: 2214 Recommends: libsocket-perl, libmonitoring-plugin-perl | libnagios-plugin-perl (>= 0.31), libnet-snmp-perl (>= 5), whois, nagios-plugins-basic, libnet-dns-perl, libdate-manip-perl, libnet-cups-perl, libio-socket-ssl-perl, libmail-imapclient-perl, libnet-smtp-tls-perl, libnet-smtp-ssl-perl, libnet-ssleay-perl, libnet-smtpauth-perl, bind9-host | knot-host, python, liblocale-gettext-perl, liblwp-useragent-determined-perl, snmp, freeipmi-tools, libipc-run-perl, lsof, libyaml-syck-perl, libxml-simple-perl, python-pymongo, libdbd-mysql-perl, libreadonly-perl, libdata-validate-domain-perl, libdata-validate-ip-perl, libredis-perl, procps, libtimedate-perl, openssl, libwebinject-perl, libnet-dns-sec-perl, ruby | ruby-interpreter, binutils, perl, libc6 (>= 2.14), libmemcached11, libmemcachedutil2, libvarnishapi1 (>= 3.0.0) Suggests: backuppc, perl-doc, libsys-virt-perl, cciss-vol-status (>= 1.10), mpt-status, smstools (>= 3~), expect, nagios-plugin-check-multi, moreutils, percona-toolkit, python2.7 Enhances: nagios-plugins, nagios-plugins-basic, nagios-plugins-standard Priority: extra Section: net Filename: pool/main/n/nagios-plugins-contrib/nagios-plugins-contrib_21.20170223+1ts2_amd64.deb Size: 455254 SHA256: 516d4e73993ea143aac4de420fa547e16a713265eaac16b6b4265eefce246ab7 SHA1: 4caef02cb6c4a47609821e0f507c9bdf59581588 MD5sum: f422e50054e4534e269b75046a33435c Description: Plugins for nagios compatible monitoring systems This package provides various plugins for Nagios compatible monitoring systems like Nagios and Icinga. It contains the following plugins: . * check_ajp (1): plugin to monitor the AJP ping response time Should work with all application servers (Tomcat, JBoss,....) which provide an AJPv13 connector. * check_backuppc (1.1.0): plugin for checking on the status of BackupPC backups * check_bgpstate (1.0): plugin to check all BGP session on Cisco routers * check_checksums (20130611): plugin to verify file checksums against (local, not 100% secure) lists. Supports md5 sha1 sha224 sha256 sha384 sha512 checksums. * check_clamav (1.2): plugin to check for clamav signature freshness This script is used to compare the version and signature level of the currently running clamd daemon with the latest available versions listed in the TXT record for current.cvd.clamav.net. * check_cups (0.2): plugin to check queues on a remote CUPS server This plugin is monitoring of queues on a remote CUPS server, which means that it doesn't need to be installed on the print server and run via NRPE. * check_drbd (0.5.3): plugin to check DRBD device states This plugin is for checking DRBD device states. It parses the /proc/drbd device and analyses the output. * check_email_delivery (0.7.1b): plugin to monitor email delivery Some typical uses of this plugin include: - check SMTP server - check messages and quota on IMAP server - check email delivery loop - check auto-responder function - keep an eye on email lag - monitor automated mailboxes - check email-to-FTP or other special email gateways * check_etc_hosts (?): plugin to check /etc/hosts for DNS consistency Check /etc/hosts, and make sure the content matches the information in DNS. Lookup IP, and check if the names listed in /etc/hosts maches the one in DNS. It will ignore entries with '# NAGIOSIGNORE' at the end. * check_etc_resolv: plugin to check /etc/resolv.conf Check /etc/resolv.conf, and make sure the name servers listed are working. It will ignore entries with '# NAGIOSIGNORE' at the end. * check_graphite: Plugin to monitor graphite metrics * check_haproxy (rev135): plugin to check the HAProxy statistics url * check_haproxy_stats (1.0.1): check haproxy via admin socket Different from check_haproxy this plugin is able to check haproxy via the unix admin socket. * check_hp_bladechassis (1.0.1): plugin to check the hardware health of HP blade enclosures via SNMP. The plugin is only tested with the c7000 enclosure. * check_hpasm (4.7.5.2): plugin to check the hardware health of HP Proliant Servers It either uses snmp or - if installed - the hpasm package locally. The plugin checks the health of * Processors * Power supplies * Memory modules * Fans * CPU- and board-temperatures * Raids and alerts you if one of these components is faulty or operates outside its normal parameters. * check_httpd_status (rev153): plugin checking Apache or Lighthttpd server-status page (using mod_status) * check_ipmi_sensor (3.12): IPMI Sensor Monitoring Plugin Plugin to monitor the hardware status (fan speed, temperaturs, voltages, power usage, ...) of a server using IPMI. * check_libs (0.2015012901 ): plugin to report the usage of no longer existing libraries by running processes * check_libvirt (v7.0.3): monitor virtualization solutions using libvirt * check_lm_sensors (4.1.1): plugin to monitor hardware sensors and disk temperatures * check_memcached (1.3): plugin to check memcached instances It will give a critical message if a partiular memcached host is inaccessible and generate a warning if the hit/miss ratio falls below a given threshold or the number of evictions exceeds a given limit. Hit/miss and evictions are measured over a 30 minute interval, using a memcached object to store the earlier statistics. * check_memory (1.0.1): plugin to check for free memory This plugin excludes the system cache and buffer, because on some system with very stable memory usage it is perfectly normal for system cache to fill in all available memory. * check_mongodb (7248618): Plugin script to monitor your MongoDB server(s) * check_multipath (0.4.7): plugin to monitor the number of available and failed paths of multipath devices * check_mysql_health (2.2.2): plugin to check various parameters of a MySQL database * check_nfsmounts: checks whether there are stale NFS mounts on the host * check_printer: plugin to check printer supply levels using SNMP It outputs performance data for all supplies found, for example toner and drum. * check_raid (4.0.5): plugin to check sw/hw RAID status The plugin looks for any known types of RAID configurations, and checks them all. . Supports: - Adaptec AAC RAID via aaccli or afacli or arcconf - AIX software RAID via lsvg - HP/Compaq Smart Array via cciss_vol_status (hpsa supported too) - HP Smart Array Controllers and MSA Controllers via hpacucli - HP Smart Array (MSA1500) via serial line - Linux 3ware SATA RAID via tw_cli - Linux Device Mapper RAID via dmraid - Linux DPT/I2O hardware RAID controllers via /proc/scsi/dpt_i2o - Linux GDTH hardware RAID controllers via /proc/scsi/gdth - Linux LSI MegaRaid hardware RAID via CmdTool2 - Linux LSI MegaRaid hardware RAID via megarc - Linux LSI MegaRaid hardware RAID via /proc/megaraid - Linux MegaIDE hardware RAID controllers via /proc/megaide - Linux MPT hardware RAID via mpt-status - Linux software RAID (md) via /proc/mdstat - LSI Logic MegaRAID SAS series via MegaCli - LSI MegaRaid via lsraid - Serveraid IPS via ipssend - Solaris software RAID via metastat - Areca SATA RAID Support via cli64/cli32 - Detecting SCSI devices or hosts with lsscsi * check_rbl (1.3.8): plugin to check if a server is blacklisted * check_redis (0.73): Redis Server check plugin This plugin checks Redis NoSQL database status variables, measures its response time and if specified allows one to set thresholds on one or more key data. You can set thresholds for data in stats variables and some of them are also conveniently available as long options with special threshold syntax. Plugin also calculates statistics such as Hitrate (calculated as rate of change of hits/misses) and memory use and can check replication delay. * check_shutdown (0.0.20110203): plugin to detect shutdown in progress Report when a reboot is in progress. This is useful to detect if reboot-when-idle or similar have been used on a server. * check_smstools: plugin to check GSM Modems using smstools check_smstools is a plugin to monitor a GSM modem signal quality and registration status with smstools. * check_snmp_environment (0.7): plugin to check various hardware statuses Using snmp the plugin is able to retrieve Fan, power-supply, voltage, temperature, card and module status and various other information from Cisco, Nokia, Blue Coat, IronPort, Foundry Network, Linux (using lm-sensors), Extreme Networks, Juniper Networks, HP ProCurve, Netscreen, Citrix NetScaler and Transmode Systems hardware. * check_snmp_time (1.1): plugin to check the time on a server using SNMP This plugin queries the remote systems time through SNMP and compares it against the local time on the Nagios server. This identifies systems with no correct time set and sends alarms if the time is off to far. HOST-RESOURCES-MIB::hrSystemDate.0 used here returns 8 or 11 byte octets. SNMP translation needs to be switched off and to be converted the received SNMP data into readable strings. * check_ssl_cert (1.37.0): plugin to check the CA and validity of an X.509 certificate * check_uptime (0.521): check_uptime returns uptime of a system in text (readable) format as well as in minutes for performance graphing. The plugin can either run on a local unix system (using 'uptime' command) or check remote system by SNMP. Also it is able to report one CRITICAL or WARNING alert if system has been rebooted since last check. * check_v46 (2013-08-26T07:33:11Z): ipv4/ipv6 Nagios plugin wrapper Nagios plugin wrapper for running the actual plugin for both / either of IPv6 and/or IPv4. The worst result of the actual plugin runs will be the wrapper return value, that is, result will be OK only if all checks returned OK. Compatible with any plugin with standard command line options -6/-4. * check_varnish (258c486): plugin to monitor varnish instances * check_webinject (1.80): plugin for testing web services It uses the WebInject Perl module for automated testing of web applications and web services. It can be used to check individual system components that have HTTP interfaces (JSP, ASP, CGI, PHP, AJAX, Servlets, HTML Forms, XML/SOAP Web Services, REST, etc). * check_whois (1.21): plugin to check for the expiration of a domain. The plugin may not yet work with all registrars, since their output formats differ or there is no expiration date in the whois output. * check_zone_auth (1.13): plugin to ensure that the authoritative nameservers for a given zone remain in sync. * check_zone_rrsig_expiration (1.14): plugin to check for expiration of signatures in dnssec-enabled zones. * dsa (1c0b9ec): plugins from the Debian System Administrators nagios plugins repository. * check_cert_expire: check for certificate expiration using openssl on the certificate file * check_cert_expire_dir: checks if any of the *.crt files in a directory on disk will expire soon * check_dnssec_delegation: check for correct DNSSEC delegation * check_entropy: check if there is enough entropy available. * check_packages: replacement for check_apt; needs a cronjob to update the apt database regularly * check_running_kernel: check if a system was rebooted after a kernel upgrade * check_soas: check SOA records * check_statusfile: deliver the content of a status file as check result * extras (1): various scripts and extras Not a plugin, but a collection of various useful event/obsession handlers and similar scripts. * percona-nagios-plugins (1.1.7): Percona Monitoring Plugins (nagios) Nagios MySQL Monitoring plugins writting/provided by Percona. . Some scripts and binaries need more packages installed to work, which is implemented as recommends. Package: nagios-plugins-eth Version: 1.08 Architecture: all Maintainer: Matija Nalis Installed-Size: 39 Depends: bash, perl, ethtool Multi-Arch: foreign Priority: extra Section: net Filename: pool/main/n/nagios-plugins-eth/nagios-plugins-eth_1.08_all.deb Size: 8672 SHA256: 1c1ca5700c502e489651b92c243544bad5ca55ee93eb5c7602357d48ee59f92f SHA1: f9d11164ef2fbf8cf7ec7a7c1d8501d46039d282 MD5sum: 54269fa7d7bfdd79ddbb4cf1485b51e5 Description: nagios ethernet checks provides check_linux_bonding and check_physical_link nagios checks Package: nagios-smart-multi Version: 1.17 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 57 Depends: perl:any, python3, smartmontools, sudo Recommends: nagios-plugins-basic Suggests: nagios-nrpe-server | icinga | icinga2 | nagios3 Enhances: nagios-plugins-basic Replaces: check-multi-smart Priority: optional Section: net Filename: pool/main/n/nagios-smart-multi/nagios-smart-multi_1.17_all.deb Size: 12812 SHA256: 9ce6c1814e4f539153a477bb74f0bd2bce43731836def1307870b3a3f92e55be SHA1: ae23c0f264c689f7c78af4808a34e8e4f2ab7e47 MD5sum: c156ac44765340468a027b4864673efb Description: nagios plugin to check S.M.A.R.T. status of disks Use one Nagios check to check for all your S.M.A.R.T. enabled disks. This nagios plugin checks advanced S.M.A.R.T. status (health, read errors/bad sectors, temperature and other factors) on multiple disks automatically. It does that by running several external nagios checks, some of them included. You can ignore unwanted checks for unwanted disks. Package: nagios-zentyal Version: 1.01 Architecture: all Maintainer: Matija Nalis Installed-Size: 22 Depends: perl, zentyal-core, nagios-nrpe-server, tomsoft-sysv Multi-Arch: foreign Priority: required Section: admin Filename: pool/main/n/nagios-zentyal/nagios-zentyal_1.01_all.deb Size: 3208 SHA256: db8b4827326d76353945374787dcccbe7055461e9fd1e324b8f091915db61caf SHA1: 99a86ed0973ff4000b27726cf901ca6f884459ed MD5sum: a15f4bf2b4d6a9b3e4fc958f92b458aa Description: check_zentyal for nagios/icinga You should install this package on zenytal servers. Package: nagios-zextras Version: 1.12 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 26 Depends: perl:any, libtimedate-perl, monitoring-plugins-basic | nagios-plugins-basic, sudo, tomsoft-sysv | tomsoft-broken-systemd Suggests: nagios-nrpe-server | icinga Enhances: monitoring-plugins-basic Priority: extra Section: net Filename: pool/main/n/nagios-zextras/nagios-zextras_1.12_all.deb Size: 5068 SHA256: f5331c2f924c71358de9958741dbbec94431393106a9f5688720805302f9710d SHA1: 307117d5e4adb85920a9d0a09386d8972bb4f4f5 MD5sum: c01f3a2e370a2e3cd72046be12c32432 Description: Zimbra zextras license and update checks will use 'zxsuite core getLicenseInfo' and 'zxsuite core doCheckUpdate' to check number of licences, expiration date, if updates are available etc. Package: percona-release Version: 1.0-27.generic Architecture: all Maintainer: Percona Development Team Installed-Size: 47 Pre-Depends: gpgv Depends: findutils, curl, grep, lsb-release Homepage: https://www.percona.com/downloads/percona-release Priority: optional Section: misc Filename: pool/main/p/percona-release/percona-release_1.0-27.generic_all.deb Size: 11804 SHA256: 2acb2650562adcee4f53ed69b36487ab6825b456239a138c88019e3ca399ccc0 SHA1: 17def89d5a99ab2f7405aecf1b7ebcd35bb3d622 MD5sum: 81cc9cc09386b7397696f0467baac5d3 Description: Package to install Percona gpg key and APT repos Package: postgrey Version: 1.37-git20180122 Architecture: all Maintainer: Antonio Radici Installed-Size: 197 Depends: adduser, debconf, libberkeleydb-perl, libnetaddr-ip-perl, libnet-dns-perl, libnet-server-perl (>= 0.87), perl, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0 Recommends: libnet-rblclient-perl, libparse-syslog-perl, postfix | exim4 Breaks: libsys-syslog-perl (<< 0.21) Homepage: http://postgrey.schweikert.ch/ Priority: optional Section: mail Filename: pool/main/p/postgrey/postgrey_1.37-git20180122_all.deb Size: 58780 SHA256: e83fd5660eef7e92b9fdde3901283fa2ec0571537eb0a30dfec872076bb080c2 SHA1: 3ef61e38f6191ae09513cc2149cf128bb20e3a9a MD5sum: acb3b0eaa0095228559c2dce10ddc932 Description: greylisting implementation for Postfix This package provides a policy server for Postfix to implement "greylisting". . Greylisting is a spam filtering method that rejects email from external servers on the first try. Spammers don't usually retry sending their messages, whereas legitimate mail servers do. . While Postgrey is designed for use with Postfix, it can also be used with Exim. Package: pxz Version: 5.000a Architecture: all Maintainer: Matija Nalis Installed-Size: 11 Depends: xz-utils (>= 5.2.4-1) Replaces: pxz-dummy Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/p/pxz/pxz_5.000a_all.deb Size: 2360 SHA256: 3b9779bf987fe66ee925fa9260cddd4576c0db57db1e74b270cf7c1d0270fd3d SHA1: b79adc0ad0127060a47551b1ba4b8fbc51f5b4b3 MD5sum: 7c983c9064943ac0417011b7885fff81 Description: wrapper for pxz, as it is no longer used You should install this package if you can't install old pxz (as on Bullseye) . It will call xz (with max threads) instead. Package: storcli Version: 7.1907.0.0 Architecture: amd64 Maintainer: Matija Nalis Installed-Size: 7682 Provides: megaclisas Multi-Arch: foreign Homepage: https://www.intel.com/content/www/us/en/download/17809/storcli-standalone-utility.html Priority: optional Section: misc Filename: pool/main/s/storcli/storcli_7.1907.0.0_amd64.deb Size: 1989112 SHA256: 8fa140c322d0675f31ed8a1d4a5f41a9389c620ee8fb76a3016fe737f3342ee7 SHA1: 5530610e9349cdb10d79a7bf807eb9811a105e4c MD5sum: 9acd0c1f9891c2e4fabbc6430f4076e3 Description: Latest MegaRAID StorCLI MegaRAID StorCLI Command Line Interface, allows you to view the status of and manage RAID controllers and associated drives. Package: tomsoft-apt-source Version: 1.03 Architecture: all Maintainer: Matija Nalis Installed-Size: 21 Recommends: tomsoft-scripts Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-apt-source/tomsoft-apt-source_1.03_all.deb Size: 5536 SHA256: 2adcc349f851471911c849e5332bf3c434b83dbdd4f2e3d0adee4f4e4d0e88e2 SHA1: 3bb4bac3c8fcc77e4c0fb3f8c9c5751ad683b3f7 MD5sum: 5c81d694e1fa5ae099935f8de102708b Description: Tomsoft.hr Debian repository keys Debian repository and keys to use with https://debian.tomsoft.hr/ Package created to ease 2026 transition from legacy SHA-1 keys to more secure ones. Package: tomsoft-autoupgrade Version: 1.19 Architecture: all Maintainer: Matija Nalis Installed-Size: 30 Pre-Depends: unattended-upgrades Depends: nagios-plugins-contrib, unattended-upgrades (>= 2.8) | unattended-upgrades (<= 1.00) | update-notifier-common, apt, tomsoft-sysv | tomsoft-systemd Suggests: apt-listbugs, debdelta Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-autoupgrade/tomsoft-autoupgrade_1.19_all.deb Size: 6452 SHA256: 4f99f01ccbcce610bd406bf608eca91e4c04f602be4072d2ecd4265de87c4931 SHA1: 0f5b3fce029f40b83787bb3d5bd7e97f4f6263d9 MD5sum: 26a3a59148b1bda863db7dfcc8631fec Description: Tomsoft.hr debian autoupgrade with configuration This autoupgrade will reboot a server if required and set in /etc/apt/apt.conf.d/50unattended-upgrades (new version gets installed) . Otherwise it will just setup unattended-upgrades to upgrade packages. Package: tomsoft-bacula Version: 1.23 Architecture: all Maintainer: Matija Nalis Installed-Size: 16 Depends: bacula-fd, sharutils, pwgen, dnsutils, tomsoft-sysv | tomsoft-broken-systemd Multi-Arch: foreign Priority: optional Section: mail Filename: pool/main/t/tomsoft-bacula/tomsoft-bacula_1.23_all.deb Size: 3720 SHA256: 214a5041ee66e84313e6c415c81f6826798fa6f5a29a86238fcc2fb9f7bf6f7a SHA1: c89ba3c276d8f1be3456724faff966e8a57a0d13 MD5sum: faaed8f05bef7b6b2bb7e02c4da73b5e Description: Tomsoft.hr internal server bacula-fd installer It will autoconfigure config files on client, and show what to add on sligshot server. Package: tomsoft-boot-verbose Version: 1.02 Architecture: all Maintainer: Matija Nalis Installed-Size: 10 Pre-Depends: grub-pc Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-boot-verbose/tomsoft-boot-verbose_1.02_all.deb Size: 2508 SHA256: 3d9c2abde8bc3f0b5da215ed13a43ae7f3582bcc4e79a576deb5d2e9ec5aae66 SHA1: 0f6bbb1f3db2bac37e307612040900476364e02c MD5sum: f49a84c08c99b3a0df3db1f76afbcd7c Description: Tomsoft.hr verbose boot Especially for Ubuntu, Zentyal and similar which try to hide everything Package: tomsoft-broken-systemd Version: 1.02 Architecture: all Maintainer: Matija Nalis Installed-Size: 9 Suggests: systemd, systemd-sysv Conflicts: tomsoft-dummy-systemctl, tomsoft-sysv Provides: tomsoft-systemd Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-broken-systemd/tomsoft-broken-systemd_1.02_all.deb Size: 2412 SHA256: f3cf1e8350d5699eea2fd3ddc01ada1445dbc0afd7635301066f28eff6897533 SHA1: 4cfc38f56b4068a14147fb093ad88a88b6373e08 MD5sum: 42ff1b36a79309011aca7310e6280aec Description: Tomsoft.hr server hack for using systemd instead of SysV-init You should NOT install this metapackage. You should install tomsoft-sysv package instead whenever possible! . Only if systemd/systemctl is absolutely required, install this package instead, but beware that things may break and that there is no support/warranty for this configuration. Package: tomsoft-custom-mailer Version: 1.02 Architecture: all Maintainer: Matija Nalis Installed-Size: 13 Pre-Depends: bind9-host | host | knot-host Depends: nullmailer | default-mta | mail-transport-agent, bsd-mailx | heirloom-mailx (<< 14.8) | mailx Conflicts: mailutils Breaks: tomsoft-mailer, tomsoft-no-mailer Replaces: tomsoft-mailer, tomsoft-no-mailer Multi-Arch: foreign Priority: standard Section: mail Filename: pool/main/t/tomsoft-custom-mailer/tomsoft-custom-mailer_1.02_all.deb Size: 2872 SHA256: e061fb7f129630d31c1c3ea09f3dcd4f3d50a0a76caf2469d42c3e7270c57f37 SHA1: a78950da61334cd29a0e10b326d08779545222cb MD5sum: 5feabff9085503c83fa317bf67bfa2eb Description: MTA for alternative customer central mail delivery You should install this metapackage on all servers which don't use full-blown MTA. Does not touch nullmailer config, admin must configure separately! Package: tomsoft-default Version: 2.11 Architecture: all Maintainer: Matija Nalis Installed-Size: 15 Depends: tomsoft-virt-or-phys | tomsoft-kvm | tomsoft-virtualbox | tomsoft-physical | tomsoft-virt-common, tomsoft-int-or-ext | tomsoft-internal | tomsoft-external, screen, joe, less, git, etckeeper, tomsoft-smartcard-sudo | libssl1.0.2 | libssl1.0.0 | libssl1.1 (<< 1.1.1), tomsoft-scripts, tomsoft-no-mailer | tomsoft-mailer | tomsoft-custom-mailer, lsb-release, tomsoft-sysv | tomsoft-broken-systemd, debsums, tomsoft-users, psmisc, lsof, strace, sharutils, acpid, ssh, nmap, htop, ethtool, net-tools, mc, lshw, bwm-ng, finger, cron-apt, pwgen, make, unzip, zip, tcpdump, host, bzip2, curl, lynx, telnet, apt-file, rsync, file, moreutils, libtime-duration-perl, iotop, pv, bc, pinfo, procps, mtr-tiny, iputils-arping | arping, netcat-traditional, debian-security-support | ubuntu-keyring, speedtest-cli | ubuntu-keyring | base-files (<< 8), sash, ca-certificates, wget, zstd, silversearcher-ag, tomsoft-boot-verbose, plocate, ncdu, tomsoft-apt-source Recommends: parted, gdisk, fdisk, deborphan, fd-find Suggests: tomsoft-openvpn Conflicts: consolekit, locate, os-prober, qstat, task-english, tasksel, tasksel-data Multi-Arch: foreign Priority: required Section: admin Filename: pool/main/t/tomsoft-default/tomsoft-default_2.11_all.deb Size: 3524 SHA256: 0fc8cdf1941194c7e3cb1d9d942b0ff93828fe1f79de386618a1f2f24bfec5c1 SHA1: 04a117859eed46fb9dfbeb92c94d57d4bca59f5d MD5sum: 3e7aa1f0bf4d3a5d3b784892008e5c4e Description: Tomsoft.hr default repository main package You should install this metapackage on ALL servers where you work. . Also it depends on tomsoft-virtualbox | tomsoft-physical, so you should install at least one of those. Take a look at Recommends and Suggests too! Package: tomsoft-develop Version: 1.06 Architecture: all Maintainer: Matija Nalis Installed-Size: 12 Pre-Depends: tomsoft-scripts (>= 1.74) Depends: zsh, adduser, sudo Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-develop/tomsoft-develop_1.06_all.deb Size: 3292 SHA256: 2346a032918ed703ba96bd097182d65e1b7a32517a30e3e3c9b11143e19e1b41 SHA1: 0cdda9a18120f2094ba9af3e0992ba6535c226b7 MD5sum: 1cfb5675a83fa78fdd37ddab13334d7a Description: Tomsoft.hr develop users You should install this dependency package on customers servers where develop access is required. . It creates few named developer users and (possibly) their allowed sudo commands . Note that if /etc/default/tomsoft-users exists, script may skip adding/updating/removing users listed there. Package: tomsoft-dummy-systemctl Version: 1.05 Architecture: all Maintainer: Matija Nalis Installed-Size: 11 Recommends: tomsoft-sysv Conflicts: tomsoft-broken-systemd Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-dummy-systemctl/tomsoft-dummy-systemctl_1.05_all.deb Size: 2756 SHA256: fdf7b741a9b4f96165611f2263e756be7494dd02c2b74cd81a887912c425a7fb SHA1: a57c294f8d66ada586b3437b1a8e16297ae2ca7b MD5sum: 1260c1247bb9bc0d2782c65de8dfa3fd Description: Tomsoft.hr hack providing dummy systemctl on SysV-init systems You should NOT install this metapackage. This is temporary workaround until systemd is fully supported. It provides dummy /sbin/systemctl which does nothing, so upgrading of packages relying on systemd will not fail. . Those packages will still need to me reloaded in some other way, and/or machine rebooted to bring it in known updated state. Package: tomsoft-external Version: 1.13 Architecture: all Maintainer: Matija Nalis Installed-Size: 10 Depends: iproute2 | iproute Suggests: tomsoft-nadzor Conflicts: tomsoft-int-or-ext, tomsoft-internal Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-external/tomsoft-external_1.13_all.deb Size: 2788 SHA256: b4b6a334dff5384676f71e1b466d85517acc647c935d25f6e3f320888901955c SHA1: e8002056cc9f67ba1a8ecdd35a444944439d5b56 MD5sum: a0fa1f172342d864b84415855bb2a105 Description: Tomsoft.hr external servers (metapackage) This is for all Tomsoft servers *outside* the company at Vrbik! . if you are not in tomsoft-internal, then you're in tomsoft-external Package: tomsoft-ganeti-node Version: 1.55 Architecture: all Maintainer: Matija Nalis Installed-Size: 99 Depends: tomsoft-physical, ganeti, drbd-utils, qemu-kvm, qemu-utils, bridge-utils, vlan, sysfsutils, kpartx, iptraf-ng, pigz, fping, molly-guard, tomsoft-sysv Conflicts: dbus, tomsoft-kvm, tomsoft-virt-or-phys, tomsoft-virtualbox Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-ganeti-node/tomsoft-ganeti-node_1.55_all.deb Size: 17484 SHA256: 9fe4ca65c47b92fceb8810130dbffa15a77f0be5a17fb57462f1e5e6d0cbe746 SHA1: a38ab3fa356d90a7b2666c400faacd107fa8e966 MD5sum: ccc6e89e5857f572324aaf07040879b1 Description: Tomsoft.hr ganeti-node physical servers This is only for physical server ganeti cluster nodes (masters)! . adds aliases for gnt-* commands, etc. Package: tomsoft-hyperv Version: 1.04 Architecture: all Maintainer: Matija Nalis Installed-Size: 10 Depends: tomsoft-virt-common, tomsoft-sysv | tomsoft-systemd Conflicts: tomsoft-kvm, tomsoft-physical, tomsoft-virt-or-phys, tomsoft-virtualbox, tomsoft-vmware Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-hyperv/tomsoft-hyperv_1.04_all.deb Size: 2528 SHA256: 2fc6a63954fa67fba99c542464b409d8c06e4160c9988d838b48fcc3c529dc0b SHA1: ffa771f1409534c7e3ba251bda55366d0ea96345 MD5sum: 58088da9517d19eac17ceaae7ba5821f Description: Tomsoft.hr hyperv servers metapackage This is only for hyperv servers! Package: tomsoft-int-or-ext Version: 1.04 Architecture: all Maintainer: Matija Nalis Installed-Size: 10 Depends: tomsoft-default Conflicts: tomsoft-external, tomsoft-internal Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-int-or-ext/tomsoft-int-or-ext_1.04_all.deb Size: 2564 SHA256: ddf305f2ae6a7b630cb649e770e944c2b0a6f3cdb2508651fdc9cd934508a017 SHA1: 3f54f3645c1838b72cc26ca6356e70f2f128e609 MD5sum: 5e7858898d06a1f2f7e6115233c23f9c Description: Tomsoft.hr BROKEN package (metapackage) You must choose either tomsoft-internal or tomsoft-external -- NOT this package!!! . This gets installed by default by tomsoft-default if you do not choose "tomsoft-internal" nor "tomsoft-external". . Just choose correct package! . FIXME: there should be nagios check in tomsoft-default which returns error if this package is installed Package: tomsoft-internal Version: 1.22 Architecture: all Maintainer: Matija Nalis Installed-Size: 17 Depends: tomsoft-default, tomsoft-bacula, iproute2 | iproute, tomsoft-sysv | tomsoft-broken-systemd, tomsoft-wazuh Recommends: tomsoft-nadzor Conflicts: bacula-traymonitor, tomsoft-external, tomsoft-int-or-ext Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-internal/tomsoft-internal_1.22_all.deb Size: 3200 SHA256: ffcb074d55143a743a99ee1a99a961de950f2a30807c2bbc02726cbd844303fe SHA1: 4198ff1755e733d733deaf219a43fed5f897f192 MD5sum: 077ab57b0704ba0aec9994d430ebe88b Description: Tomsoft.hr internal servers This is only for Tomsoft servers inside the company at Vrbik! . adds apt-proxy to hungamunga, syslog logger server to katara etc. Package: tomsoft-korisnik Version: 1.07 Architecture: all Maintainer: Matija Nalis Installed-Size: 16 Pre-Depends: tomsoft-scripts (>= 1.37) Depends: zsh, adduser, sudo Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-korisnik/tomsoft-korisnik_1.07_all.deb Size: 3344 SHA256: b2fcb17036cbdd1df1085b3aa67eaf5fde3233b93a114b7ceea933ba02c5e2f6 SHA1: 4c90ae5a93bffce29e929b241a738d80b0633c11 MD5sum: 590a0a13946bd1bc9973100749255473 Description: Tomsoft.hr korisnik user You should install this package on customers servers where customer himself is allowed to do upgrading and cluster access. . It contains tskorisnik user and it's allowed sudo commands . Nakon instalacije, ne zaboraviti napraviti "passwd tskorisnik" da mu se postavi password! . Note that if /etc/default/tomsoft-users exists, script may skip adding/updating/removing users listed there. Package: tomsoft-kvm Version: 1.19 Architecture: all Maintainer: Matija Nalis Installed-Size: 11 Depends: tomsoft-virt-common, qemu-guest-agent | base-files (<< 8), acpi-support-base | ubuntu-standard, acpid, secure-delete, tomsoft-sysv | tomsoft-systemd Conflicts: tomsoft-hyperv, tomsoft-physical, tomsoft-virt-or-phys, tomsoft-virtualbox, tomsoft-vmware, virtualbox-guest-dkms, virtualbox-guest-utils, virtualbox-ose-guest-dkms, virtualbox-ose-guest-utils Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-kvm/tomsoft-kvm_1.19_all.deb Size: 2732 SHA256: b67c1eb2f5cabf95c987267ed65658897c83b4104aa864bb5b5fa14f16769989 SHA1: 37c58e99655757c69ec6a54d543fd65842b556bd MD5sum: 35dc62f6be9a944997f7570b35936a67 Description: Tomsoft.hr kvm (ganeti) servers metapackage This is only for kvm (ganeti) Tomsoft servers! . adds kludges for NTP, etc. Package: tomsoft-mailer Version: 1.38 Architecture: all Maintainer: Matija Nalis Installed-Size: 16 Pre-Depends: bind9-host | host | knot-host Depends: nullmailer | default-mta | mail-transport-agent, bsd-mailx | heirloom-mailx (<< 14.8) | mailx, tomsoft-sysv | tomsoft-broken-systemd Conflicts: mailutils Breaks: tomsoft-custom-mailer, tomsoft-no-mailer Replaces: tomsoft-custom-mailer, tomsoft-no-mailer Multi-Arch: foreign Priority: standard Section: mail Filename: pool/main/t/tomsoft-mailer/tomsoft-mailer_1.38_all.deb Size: 3340 SHA256: bf10666249fb8120f39e5765b264a8fd0fb88669dd2d28dc551a37fc3476fccf SHA1: 567077c14fd961ddfcbd13d83ee46fd826f446fc MD5sum: c8f89fc7f030836d119486e51d64a40b Description: Tomsoft.hr MTA for central mail delivery with configuration You should install this metapackage on all servers which don't use full-blown MTA Package: tomsoft-mysql-backup Version: 1.104 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 52 Depends: debconf (>= 0.5) | debconf-2.0, perl, pigz, zstd (>= 1.3.8), rsync, bsd-mailx, psmisc, mysqldumpextract, mariadb-client | default-mysql-client | virtual-mysql-client | mysql-client | percona-xtradb-cluster-client Recommends: nagios-local-multi, mariadb-server | mysql-server | percona-xtradb-cluster-server Homepage: http://debian.tomsoft.hr/ Priority: optional Section: database Filename: pool/main/t/tomsoft-mysql-backup/tomsoft-mysql-backup_1.104_all.deb Size: 15728 SHA256: a7e26b836e9335297cd9e5492484ecf4bd264b6c52ac27ac5861c1490d8dbc16 SHA1: 3f21dd9aa0ea58178d1a1ddbbae768d408e6a28c MD5sum: 9c882f89fab4b3c3519d7852e4f48164 Description: tool to backup all mysql databases Also needed for tomsoft-sched-mysqlslave to have lockless replication setup, without disturbing main SQL database. Contains nagios check for backups too. Package: tomsoft-mysql-common Version: 2.20 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 2535 Pre-Depends: tomsoft-mysql-config, perl, default-mysql-server (>= 1.0.7) | mariadb-server (>= 1:10.5.12) | percona-xtradb-cluster (>= 8.0.31) | percona-xtradb-cluster-80 | percona-server-server (>= 8.0.0) | mysql-server (>= 8.0.32) Depends: perl:any, percona-toolkit, procps, nagios-check-many, nagios-plugins-contrib, mariadb-backup | base-files (<= 10.2) | percona-xtradb-cluster | percona-xtradb-cluster-56 | percona-xtradb-cluster-57 | percona-xtradb-cluster-80 | percona-server-server (>= 8.0.0), tomsoft-sysv | tomsoft-systemd Conflicts: mysql-server-5.5, mysqltuner Homepage: http://debian.tomsoft.hr/ Priority: important Section: database Filename: pool/main/t/tomsoft-mysql-common/tomsoft-mysql-common_2.20_all.deb Size: 118564 SHA256: cd4b8a8da6d9dbda63df177265bbd89c50a7651da61cc4b586afb6365e6c8181 SHA1: b6df01f3e82c72fe9aebbeb883dafc7e2861e0b2 MD5sum: 4b90a73e7c96f31ff3da3770ff31d49b Description: Tomsoft.hr mysql server defaults This is only for servers running mysqld! . does Tomsoft default config and securing of MySQL (or mariadb or percona) server Package: tomsoft-mysql-config Version: 1.63 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 19 Pre-Depends: debconf Depends: debconf (>= 0.5) | debconf-2.0, tomsoft-sysv | tomsoft-systemd Homepage: http://debian.tomsoft.hr/ Priority: important Section: database Filename: pool/main/t/tomsoft-mysql-config/tomsoft-mysql-config_1.63_all.deb Size: 5608 SHA256: b50e97024ae76b1dbb083e655f5e28ba3c3c7e1dc6a921913a9422829c4c71ef SHA1: ed2affde37158de81e1488df7fd3a1e190e366b0 MD5sum: 169b78f75e44c12ba0596d78a626c3bd Description: Tomsoft.hr mysql server default configs (metapackage) This is only for servers running mysqld! . does default configs and passwords of mysql server, so mysql-server package do not ask for them Package: tomsoft-mysql-percona-node Version: 1.23 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 28 Pre-Depends: debconf, iproute2, percona-release Depends: debconf (>= 0.5) | debconf-2.0, tomsoft-mysql-common, percona-xtradb-cluster | percona-xtradb-cluster-57 | percona-xtradb-cluster-56 | percona-xtradb-cluster-80, percona-nagios-plugins | nagios-plugins-contrib (>= 24) Homepage: http://debian.tomsoft.hr/ Priority: optional Section: database Filename: pool/main/t/tomsoft-mysql-percona-node/tomsoft-mysql-percona-node_1.23_all.deb Size: 6508 SHA256: aeb19544ab33e03f751e7a7dafc3d268a18f6e1f469bbf61b3c3b842f4e44601 SHA1: baa6426b0995200cbd48ba9d84d2c11926b13a77 MD5sum: b3c7aab3f6ad0d9322a5c608fd55a398 Description: Tomsoft Percona MySQL cluster This package helps install and configure Percona XtraDB Cluster Package: tomsoft-mysql-proxysql Version: 1.19 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 60 Pre-Depends: debconf, iproute2, percona-release, nagios-nrpe-server Depends: debconf (>= 0.5) | debconf-2.0, python, proxysql, default-mysql-client, keepalived, libipset3, python-mysqldb, tomsoft-sysv Replaces: proxysql Homepage: http://debian.tomsoft.hr/ Priority: optional Section: database Filename: pool/main/t/tomsoft-mysql-proxysql/tomsoft-mysql-proxysql_1.19_all.deb Size: 11356 SHA256: b2411cb6cbaaddacc117abf64d8c8010086d347d1fff892ca39eb399a8342ce0 SHA1: b689ff08dee807b55eb757110df50220c760d10b MD5sum: 8391a7d11857dafeed6d5a3e11bb8b3d Description: Tomsoft Percona MySQL cluster - ProxySQL server This package helps install ProxySQL/keepalived for Percona XtraDB Cluster Package: tomsoft-nadzor Version: 1.86 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 61 Pre-Depends: debconf Depends: debconf (>= 0.5) | debconf-2.0, munin-node, nagios-nrpe-server, monitoring-plugins | nagios-plugins, monitoring-plugins-contrib | nagios-plugins-contrib, libcache-cache-perl, liblwp-useragent-determined-perl, libtext-csv-xs-perl, nagios-check-many, nagios-local-multi, pxz | xz-utils, tomsoft-mailer | tomsoft-custom-mailer | default-mta | mail-transport-agent, python3, tomsoft-sysv | tomsoft-broken-systemd Suggests: nagios-zentyal Replaces: nagios-plugins-contrib Homepage: http://debian.tomsoft.hr/ Priority: optional Section: net Filename: pool/main/t/tomsoft-nadzor/tomsoft-nadzor_1.86_all.deb Size: 11360 SHA256: 3e834f6889ae83c1ac6f62cd3fa14f7c2fdf7eac58802cf7e8ea0b0ffad900f8 SHA1: 63695d606fb64a87f1d17eaeff2d423c56998649 MD5sum: 10239d84fa2c44ab9a17de6cf92c31f9 Description: Tomsoft nadzor - munin i nagios Kreira konfiguraciju za nadzor servera za munin-node i nagios-nrpe-server Package: tomsoft-no-mailer Version: 1.06 Architecture: all Maintainer: Matija Nalis Installed-Size: 9 Breaks: tomsoft-custom-mailer, tomsoft-mailer Replaces: mail-transport-agent, tomsoft-custom-mailer, tomsoft-mailer Provides: mail-transport-agent Multi-Arch: foreign Priority: standard Section: mail Filename: pool/main/t/tomsoft-no-mailer/tomsoft-no-mailer_1.06_all.deb Size: 2344 SHA256: 40a3d52a486ca91085678a4aeeec6a4465d812555132d0f40802c2ffb381d397 SHA1: 70a36193796d08dfe26f1600b81d5abe63a0f37b MD5sum: 81e86b75fa96f9410b85d4cb40ab03f7 Description: Tomsoft.hr fake MTA used when no mail is not wanted You should install this metapackage on all servers which don't have support and nobody will look at generated emails Package: tomsoft-ntp Version: 1.14 Architecture: all Maintainer: Matija Nalis Installed-Size: 21 Depends: ntpsec | ntp, tomsoft-sysv | tomsoft-systemd Conflicts: ntpdate, systemd-timesyncd Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-ntp/tomsoft-ntp_1.14_all.deb Size: 4048 SHA256: 2a6ce63d3b978cb53f930c49f92f523fe5eb2d6c85486b174af1031ab9c67cf9 SHA1: 7f517e778b29481724e599f6fda0b3b08138d85d MD5sum: 2ca150d0940fac0741ac160cfeb72b42 Description: Tomsoft.hr NTP Use the NTP protocol to sync time and date to central Tomsoft location at ntp.tomsoft.hr Package: tomsoft-ocs Version: 1.00 Architecture: all Maintainer: Matija Nalis Installed-Size: 9 Depends: tomsoft-sysv | tomsoft-broken-systemd Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-ocs/tomsoft-ocs_1.00_all.deb Size: 2224 SHA256: e22ed1224486c5cf5cd7f9ba2db38236cb89a27188a870ec0fbd5d4d8d679206 SHA1: a284c8e48f0026d70773835386025b2dc70146e0 MD5sum: 05a2c8369a6c2b924a1da44244bf0f86 Description: Tomsoft OCS Inventory agent installer installs and configure ocsinventory-agent for internal Tomsoft use . Hardware and software inventory tool Package: tomsoft-openvpn Version: 1.02 Architecture: all Maintainer: Matija Nalis Installed-Size: 14 Depends: openvpn, tomsoft-sysv Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-openvpn/tomsoft-openvpn_1.02_all.deb Size: 2396 SHA256: a604e8104c875b2b0ceb7423f9710fd4f37ba9af902a4a36092c6d029c292167 SHA1: 7a27f4c612989b1c104751ff1d75fa126c9bb53b MD5sum: 95393744ea25d5e2092efb5cfd5a9913 Description: Tomsoft.hr openvpn with logrotate You should install this package instead of just "openvpn" to get logrotate . Do not install if you do not need openvpn package Package: tomsoft-physical Version: 1.36 Architecture: all Maintainer: Matija Nalis Installed-Size: 29 Depends: tomsoft-ntp, hdparm, sdparm, ethtool, virt-what, nagios-smart-multi, freeipmi-tools, sudo, nagios-plugins-eth, memtest86+, smartmontools, tomsoft-sysv | tomsoft-broken-systemd Recommends: tomsoft-nadzor, tomsoft-default Suggests: megacli, storcli, check-lsi-raid, tomsoft-ups | tomsoft-external | apcupsd, ifenslave-2.6 Conflicts: tomsoft-hyperv, tomsoft-kvm, tomsoft-virt-common, tomsoft-virt-or-phys, tomsoft-virtualbox, tomsoft-vmware, virtualbox-ose-guest-utils, virtualbox-ose-guest-x11 Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-physical/tomsoft-physical_1.36_all.deb Size: 5844 SHA256: 85a881aa146a6644a00461747f31e77bb943b960e8df7313559f5f6ffacb3416 SHA1: 704c97e279d885e686c88da62dc997435402ab44 MD5sum: 69eed4c7130f62a3b1d67ac18d1659fd Description: Tomsoft.hr physical servers This is only for physical Tomsoft servers! . add only stuff required for physical servers (only plain NTP for now, but will grow) Package: tomsoft-sched-common Version: 1.14 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 14 Depends: mysqldumpextract Multi-Arch: foreign Priority: optional Section: database Filename: pool/main/t/tomsoft-sched-common/tomsoft-sched-common_1.14_all.deb Size: 3304 SHA256: 861519f788e9acf20076f07231d6cc912e1be65775ccc6f9919784bfbdfc03fe SHA1: 637787c9883d61040104b2a32b1644fffecb38b1 MD5sum: 33a6f515aa27db405b94880368ac61d9 Description: common files for tomsoft-sched-mysqlmaster and others contains .sql scripts and other data which might be used independently from tomsoft-sched-mysqlmaster and tomsoft-sched-mysqlslave Package: tomsoft-sched-mysqlmaster Version: 0.65 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 30 Depends: adduser, pxz, pigz, zstd (>= 1.3.8), lzop, pbzip2, buffer, bzip2, xz-utils, mbuffer, tomsoft-mysql-common, tomsoft-default (>= 1.43), tomsoft-sysv | tomsoft-broken-systemd, tomsoft-sched-common Recommends: tomsoft-mysql-backup (>= 1.36) Conflicts: tomsoft-sched-mysqlslave Homepage: http://debian.tomsoft.hr/ Priority: optional Section: database Filename: pool/main/t/tomsoft-sched-mysqlmaster/tomsoft-sched-mysqlmaster_0.65_all.deb Size: 7880 SHA256: 99cacad81f50555361abf9aebdbd65277e1fc8cd906d50e5d39a5254c0609f57 SHA1: a819ad50a46aebabb918668f7b73e7883966f913 MD5sum: c1f5db9df4210d412195cec8b9a373fe Description: Allow scheduled mysqldumps (Tomsoft only) - SQL masters Allow scheduling mysqldumps on mysqldump.luceed.hr, to be automatically imported on test SQL server sql.tomsoft.lan (or on dedicated replication server) Package: tomsoft-sched-mysqlslave Version: 0.54 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 38 Pre-Depends: debconf Depends: debconf (>= 0.5) | debconf-2.0, perl:any, adduser, pxz | pxz-dummy, pigz, zstd, lzop, pbzip2, buffer, bzip2, xz-utils, mbuffer, tomsoft-mysql-common, eatmydata, tomsoft-watchdog, tomsoft-autoupgrade | base-files (<< 11) | tomsoft-mysql-percona-node | percona-xtradb-cluster Conflicts: tomsoft-sched-mysqlmaster Homepage: http://debian.tomsoft.hr/ Priority: optional Section: database Filename: pool/main/t/tomsoft-sched-mysqlslave/tomsoft-sched-mysqlslave_0.54_all.deb Size: 9468 SHA256: b34662b9b92c2e183b182e49ee2652b1393e40615f5b0826d1f708144ae98141 SHA1: 60fc871ff23296e9e537001e1f4eb21f0b86cf96 MD5sum: 31b39cfd3247dba96301735039ec3ef4 Description: Allow scheduled mysqldumps (Tomsoft only) - SQL slaves Allow scheduling mysqldumps on mysqldump.luceed.hr, to be automatically reimported on this dedicated MySQL slave server. Package: tomsoft-scripts Version: 1.74 Architecture: all Maintainer: Matija Nalis Installed-Size: 37 Depends: libterm-readline-gnu-perl, perl, monitoring-plugins-contrib | nagios-plugins-contrib, xz-utils, lz4 | base-files (<= 10.3), lzop, libreadline6 | libreadline5 | libedit2 (>= 3.1-20210910-1), busybox | binutils, tomsoft-sysv | tomsoft-systemd Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-scripts/tomsoft-scripts_1.74_all.deb Size: 7936 SHA256: e679f3eaaaf52d8dc7a94042dd009155c4bec86fb2a755626de9e43c04d58015 SHA1: df9ac4034669b6ca1cba76eaba8460d81fb5c881 MD5sum: 2d91c61869b379ef5e2ca6473b4359ce Description: Tomsoft.hr helper scripts You should install this package on ALL servers where you work. . It will remove locally installed version in /usr/local/*bin if installed, and put latest versions in /usr/{s}bin. . Note that if /etc/default/tomsoft-users exists, script may skip adding/updating/removing users listed there. Package: tomsoft-service Version: 1.19 Architecture: all Maintainer: Matija Nalis Installed-Size: 16 Pre-Depends: tomsoft-scripts (>= 1.74) Depends: zsh, adduser, sudo, tomsoft-sysv | tomsoft-broken-systemd Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-service/tomsoft-service_1.19_all.deb Size: 3852 SHA256: 36a7eb6b8c332fd2964a664796e71e33082718c0fb40a8e91317406d1e38f583 SHA1: bab6f5cf97b7ff25fd895c5197eb58345cf000a7 MD5sum: 63c9070d742702addf4aa93acaff62dd Description: Tomsoft.hr servis users You should install this package on customers servers where remote upgrading and support is required. . It contains tsservis user (and few named users) and it's allowed sudo commands . Note that if /etc/default/tomsoft-users exists, script may skip adding/updating/removing users listed there. Package: tomsoft-smartcard-sudo Version: 1.33 Architecture: all Maintainer: Matija Nalis Installed-Size: 24 Depends: libpam-ssh-agent-auth, sudo, tomsoft-sysv | tomsoft-broken-systemd Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-smartcard-sudo/tomsoft-smartcard-sudo_1.33_all.deb Size: 6888 SHA256: 98b2fa78ac6f758dc1392c71ed426945b71c557f85ace6aaa9e1422e5c57c18b SHA1: 587a4c971355ca9c499c0a89bca1b7242cc987d0 MD5sum: 5e88a944cb4451cb147d190be69bb2a1 Description: sudo(8) smartcard support Installs Tomsoft default admins so they can sudo(8) using OpenPGP smartcards. . You still need users to exist (and be in sudo group) Package: tomsoft-spamassassin Version: 1.15 Architecture: all Maintainer: Matija Nalis Installed-Size: 10 Depends: altermime, arj, cabextract, clamav, clamav-daemon, cpio, dcc, fuzzyocr, geoip-database, gnupg, lhasa, libauthen-sasl-perl, libbsd-resource-perl, libdbd-mysql-perl, libdbi-perl, libdigest-sha-perl | libdigest-sha1-perl, libencode-detect-perl, libfile-libmagic-perl, libgeo-ip-perl, libio-socket-inet6-perl, libio-socket-ssl-perl, libmail-dkim-perl, libmail-spamassassin-plugin-openpgp-perl, libmail-spf-perl, libmime-base64-perl, libnet-dns-perl, libnet-ldap-perl, libnet-patricia-perl, libsnmp-perl, libsys-syslog-perl, lzop, nomarch, p7zip-full, perl (>= 5.20.2), pyzor (>= 1.0.0), razor, ripole, sa-compile (>= 3.4.1), spamassassin (>= 3.4.1), unrar | unrar-nonfree | rar | unrar-free, unzip, tmpreaper Conflicts: libip-country-perl, systemd-sysv, tomsoft-broken-systemd Multi-Arch: foreign Priority: optional Section: mail Filename: pool/main/t/tomsoft-spamassassin/tomsoft-spamassassin_1.15_all.deb Size: 2912 SHA256: a4c1edb83c15a6fc2cce3eb910bc940b846d8d29099c5732f7f491f35814d459 SHA1: 20cf63350220c81b2961bc04ee0aa92abf720938 MD5sum: d204d75703f669f153373d42d16154f1 Description: Tomsoft.hr spamassassin dependencies You should install this metapackage on MX servers that run spamassassin. Package: tomsoft-support Version: 1.06 Architecture: all Maintainer: Matija Nalis Installed-Size: 12 Pre-Depends: tomsoft-scripts (>= 1.74) Depends: zsh, adduser Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-support/tomsoft-support_1.06_all.deb Size: 3536 SHA256: cb9149fe0c54af630da07c428baf19ce9ccc8fbd62544905a14ae92c28012c26 SHA1: ca932e249fddf5f1811e10d1b1fe3947ee599f3d MD5sum: cf612014830782bfab4e1be9613ced87 Description: Tomsoft.hr support users You should install this dependency package on customers servers where remote mysql access is required. . It creates tssupport user and it's allowed sudo commands . Note that if /etc/default/tomsoft-users exists, script may skip adding/updating/removing users listed there. Package: tomsoft-sysv Version: 1.41 Architecture: all Maintainer: Matija Nalis (Tomsoft Debian repo) Installed-Size: 18 Depends: debconf (>= 0.5) | debconf-2.0, sysvinit (>= 2.88dsf) | sysvinit-core (>= 2.88dsf-59.9), sysvinit-utils (>= 2.88dsf), sysvinit-core | sysvinit (<< 2.88dsf-59), sysv-rc-conf, orphan-sysvinit-scripts | sysvinit-core (<< 2.96-7+deb11u1), rsyslog Conflicts: systemd-sysv, tomsoft-broken-systemd, tomsoft-systemd Replaces: systemd-sysv Homepage: http://debian.tomsoft.hr/ Priority: important Section: admin Filename: pool/main/t/tomsoft-sysv/tomsoft-sysv_1.41_all.deb Size: 3844 SHA256: 53c11aea5900498338edbce2bad34d8f56f068c6af7d8c589525fd4119f3fb82 SHA1: 552afa58d1c6b216fdfb3de8748a3e7bd69496f7 MD5sum: 37aaced318f151e8aa3aab0e569e264a Description: Tomsoft.hr server use system V init, not systemd You should install this package on ALL servers where you work. . Systemd is bloated and buggy and we KISS. https://en.wikipedia.org/wiki/KISS_principle Package: tomsoft-ups Version: 1.06 Architecture: all Maintainer: Matija Nalis Installed-Size: 19 Depends: nut-client, nut-server, nut-snmp, tomsoft-sysv Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-ups/tomsoft-ups_1.06_all.deb Size: 3268 SHA256: f0b71de90226e10a74c073da303ac560b8dad90bf77728fb41ae207ea30ba198 SHA1: 575e3d70c2a627baf5e7da38d87d883358a59b8a MD5sum: 518aeeafcd4a138cc245d9c34963702f Description: Tomsoft.hr ups monitoring This is only for Tomsoft servers inside the company at Vrbik! So they can autoshutdown when UPS power gets low. . use "dpkg-reconfigure tomsoft-ups" to change which UPS is server connected to Package: tomsoft-users Version: 2.00 Architecture: all Maintainer: Matija Nalis Installed-Size: 30 Pre-Depends: tomsoft-scripts (>= 1.74) Depends: zsh, screen, tomsoft-smartcard-sudo | libssl1.0.2 | libssl1.0.0 | libssl1.1 (<< 1.1.1), adduser Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-users/tomsoft-users_2.00_all.deb Size: 10168 SHA256: 9fab5cd06b5bfb93e36c3174528a8ad6732c3a9ed99a117326ab538c660996aa SHA1: c9891a2eaa56995ad6fb3b2610a56fb43a5f4bdb MD5sum: 83999684aba5632ccaa33e11d0c13992 Description: Tomsoft.hr default users You should install this package on ALL servers where you work. . It contains list of active and removed users. . Note that if /etc/default/tomsoft-users exists, script may skip adding/updating/removing users listed there. Package: tomsoft-virt-common Version: 2.03 Architecture: all Maintainer: Matija Nalis Installed-Size: 15 Depends: tomsoft-ntp | time-daemon | ntp | openntpd, virt-what, tomsoft-virt-nojunk | ubuntu-standard Conflicts: tomsoft-physical, tomsoft-virt-or-phys Breaks: fancontrol, hddtemp, ifenslave, ifenslave-2.6, lm-sensors, nagios-plugins-eth, nagios-smart-multi, sdparm, smartmontools, thermald Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-virt-common/tomsoft-virt-common_2.03_all.deb Size: 3052 SHA256: d58d0b26c524b1bd6953ae5037340533cba86f435068105e96a735ac5807bbbd SHA1: 0949a6ea146d8756ea8b7430dd2b7c8d730c0d98 MD5sum: 76656757f425dfc2d3482846831d9bcb Description: Tomsoft.hr virtual servers This is common part shared by all virtual servers! . Do not install on physical servers! Package: tomsoft-virt-nojunk Version: 1.03 Architecture: all Maintainer: Matija Nalis Installed-Size: 9 Depends: tomsoft-virt-common Conflicts: tomsoft-physical, tomsoft-virt-or-phys Breaks: amd64-microcode, crda, hdparm, intel-microcode, iucode-tool, laptop-detect, mdadm, memtest86+, usb.ids, usbutils Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-virt-nojunk/tomsoft-virt-nojunk_1.03_all.deb Size: 2464 SHA256: e6feccfd95dec27985dcc41680cb103eecfa44fe3b3d4c7f89c1ceed065a8dd7 SHA1: af800f118fd5a9f173b831c0eb51c37acf0084f6 MD5sum: 200bd11981f0a26329fca7310a8cbae7 Description: Tomsoft.hr virtual servers need no junk If they are Debian. tomsoft-virt-common on Ubuntu will use ubuntu-standard, which REQUIRES junk like USB support etc. . Do not install on physical servers! Package: tomsoft-virt-or-phys Version: 1.17 Architecture: all Maintainer: Matija Nalis Installed-Size: 11 Depends: virt-what Conflicts: tomsoft-hyperv, tomsoft-kvm, tomsoft-physical, tomsoft-virt-common, tomsoft-virtualbox, tomsoft-vmware Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-virt-or-phys/tomsoft-virt-or-phys_1.17_all.deb Size: 2760 SHA256: a5350e74fec29d17c623bfa716af69f17746a306efcd6dfe821ee7024e6b89c4 SHA1: 2bff7ffcc957b6562c2aa8ed093482b2a350b998 MD5sum: d3f6e3f360efaa786f32a55063ebc341 Description: Tomsoft.hr BROKEN metapackage You must choose either tomsoft-virtualbox/tomsoft-kvm/tomsoft-... or tomsoft-physical, and not this package!!! . this gets installed by default by tomsoft-default if you do not choose any virtual nor physical variant. Just choose correct package! FIXME: there should be nagios check in tomsoft-default which returns error if this package is installed Package: tomsoft-virtualbox Version: 1.14 Architecture: all Maintainer: Matija Nalis Installed-Size: 10 Depends: tomsoft-virt-common Recommends: virtualbox-guest-utils Conflicts: tomsoft-hyperv, tomsoft-kvm, tomsoft-physical, tomsoft-virt-or-phys, tomsoft-vmware Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-virtualbox/tomsoft-virtualbox_1.14_all.deb Size: 2544 SHA256: 69c78d48531e912b522fb5a5be80ed5414f13b433bfc8dc781ab742394610284 SHA1: acc313700d6b39b3fa98af59a5d33a2623ac880d MD5sum: 05ffa661de4bffb33d09d5503851496d Description: Tomsoft.hr virtualbox servers metapackage This is only for virtualbox Tomsoft servers! . adds kludges for NTP, etc. Package: tomsoft-vmware Version: 1.04 Architecture: all Maintainer: Matija Nalis Installed-Size: 10 Depends: tomsoft-virt-common Conflicts: tomsoft-hyperv, tomsoft-kvm, tomsoft-physical, tomsoft-virt-or-phys, tomsoft-virtualbox, virtualbox-guest-dkms, virtualbox-guest-utils, virtualbox-ose-guest-dkms, virtualbox-ose-guest-utils Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-vmware/tomsoft-vmware_1.04_all.deb Size: 2544 SHA256: 575b35494a97576cd32088dd4ba349c5eb2134f4a2d987cc2630b7bffbcf5f84 SHA1: df97ef051d9b1e1d6336a7f5f6825c721f4f6469 MD5sum: 0887e2b3db9934d76fa1454cae2a026b Description: Tomsoft.hr vmware servers This dependency package is only for vmware servers! Package: tomsoft-vps-mysqlrepl Version: 1.02 Architecture: all Maintainer: Matija Nalis Installed-Size: 9 Depends: tomsoft-internal, tomsoft-sched-mysqlslave, tomsoft-service, tomsoft-kvm, tomsoft-sysv Conflicts: dbus, systemd Multi-Arch: foreign Priority: standard Section: admin Filename: pool/main/t/tomsoft-vps-mysqlrepl/tomsoft-vps-mysqlrepl_1.02_all.deb Size: 2304 SHA256: ada497fdb56c5f8a0c01ab97d3444672ebeb688538235e5a00c955b719dffa4d SHA1: f223daffc73d444e35a0c4356dbbe04bcd4d1d41 MD5sum: 98e9f93f1720ddc22b51531b955a86f4 Description: Tomsoft.hr VPS for MySQL replications (metapackage) This will just install all dependencies for MySQL replications Package: tomsoft-watchdog Version: 1.24 Architecture: all Maintainer: Matija Nalis Installed-Size: 23 Pre-Depends: virt-what Depends: watchdog, rsyslog, psmisc, tomsoft-sysv | tomsoft-systemd Multi-Arch: foreign Priority: optional Section: admin Filename: pool/main/t/tomsoft-watchdog/tomsoft-watchdog_1.24_all.deb Size: 4512 SHA256: 329e877069a6dbab4141e72af4ce88119ae02cc3d286333296072156c87cefc7 SHA1: d4f1f911897924c5cb52964f4a5e3a4dece3e540 MD5sum: 2ffefc72103175a12a93f44d8584797d Description: Tomsoft.hr watchdog with configurtion This watchdog will reboot a server if it becomes unresponsive. . It sometimes happens on KVM machines in ganeti cluster that load skyrockets (perhaps due to high I/O) and machine hangs. Package: tomsoft-wazuh Version: 1.14 Architecture: all Maintainer: Petar Godinic Installed-Size: 11 Depends: wazuh-agent (>= 4.12.0-1), curl, lsb-release Multi-Arch: foreign Priority: optional Section: misc Filename: pool/main/t/tomsoft-wazuh/tomsoft-wazuh_1.14_all.deb Size: 2912 SHA256: 54dd63e04a3d7f655c3111a45d2f504e1e3bd24d7a09cc79ed9e901a4121ce48 SHA1: ec728bb6e8f4915f1bf7538e237af44312fb9ab7 MD5sum: 552d88256efe0bd8012f8ee2c697a14a Description: Tomsoft Wazuh agent installer This is metapackage that installs wazuh-agent for internal Tomsoft use Combines SIEM (Security Information and Event Management) and XDR (Extended Detection and Response) functionalities Package: wazuh-agent Version: 4.14.1-1 Architecture: amd64 Maintainer: Wazuh Installed-Size: 47221 Depends: libc6 (>= 2.7), lsb-release, debconf, adduser, procps Conflicts: ossec-hids, ossec-hids-agent, wazuh-api, wazuh-manager Breaks: ossec-hids, ossec-hids-agent, wazuh-manager Homepage: https://www.wazuh.com Priority: extra Section: admin Filename: pool/main/w/wazuh-agent/wazuh-agent_4.14.1-1_amd64.deb Size: 13112530 SHA256: d42754ab54b0e5b16efa5987c32246a310908badb8ba009ee6896900b22d1459 SHA1: b0a91d0d8ca420f59c5c07a010a5c3fa51758fd7 MD5sum: 4ae98872cef325d6c95254c44f439127 Description: Wazuh agent Wazuh helps you to gain security visibility into your infrastructure by monitoring hosts at an operating system and application level. It provides the following capabilities: log analysis, file integrity monitoring, intrusions detection and policy and compliance monitoring.